Monitoring of Water Quality of Aquarium by using IOT technology

Authors

  • Mariam mariam Quaid-e-Awam University of Engineering Science and Technology Nawabshah
  • Kamran Ali Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, Sindh, Pakistan
  • Sughand Memon Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, Sindh, Pakistan
  • Abdul Shakoor Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, Sindh, Pakistan

Keywords:

Water Quality, IoT System, Aquarium, Sensors

Abstract

Marine life in aquarium are continuously producing harmful impurities and proteins which should be continuously removed is considered as a big problem in today’s aquariums. The water is equally important for living lives. The marine life requires equal attention for clean environment. The impurities in existing aquarium creates threat for the life of marine in result, fishes could not survive and could die as well, also for existing aquariums the removing impurities from water in the aquarium is a crucial issue. Frequent testing of water quality parameter such as Turbidity sensor to detect the suspended particles level in the water. This system will help the aquators to avoid the manual work and generate a balanced system where fishes can be survivable. This system is based on low cost electronic sensor level detection, an automated concentration measurement system is introduced to monitor the bad water quality that affect the health of fishes we propose an IOT based solution. This whole system is automated and give wireless control with the help of WIFI. The results are shown via webpage.

Downloads

Published

2020-12-31

How to Cite

mariam, M., Ali, K. ., Memon, S. ., & Shakoor, A. (2020). Monitoring of Water Quality of Aquarium by using IOT technology. Journal of Applied Engineering & Technology (JAET), 4(2), 22–34. Retrieved from https://jae-tech.com/index.php/jaet/article/view/23

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.